A printed marquee is used at a number of places and events. Using it time and again can cause it to look worn out. However, with proper care and maintenance you can be assured that the marquee looks as good as new no matter how many times you decide to use it. Custom marquees re expensive. After all you have invested time and effort in getting it stitched and printed. You have to make sure that it stays looing as good a new. The following are some tips to ensure the cleanliness of your printed marquee.
Tips for cleaning printed marquees
- Whenever you decide to clean the marquee, make sure to give all portions like the roof, walls and the panels a thorough cleaning. You can make use of a soft mop or a cloth along with mild detergent.
- The water should be warm and not too hot. This is because printed marquees may sometimes lose the color of the shine when immersed in very hot water. It’s always a good idea to wash the marquee when it I fully open so that all areas can be cleaned thoroughly.
- The more frequently a marquee is put to use, the more often it should be cleaned. In fact it is important to have it cleaned after every two or three use. This would ensure that it stays in pristine condition and doesn’t accumulate dirt. If a marquee is left too long out in the sun, it can become deteriorated with time. The weathering can have a negative impact on the print and the color and it may start to look faded and old.
- Once the marquee is cleaned it should be left to dry in the open. Once it’s completely dry it should be placed back into it protective covering to be sued again the next time. Proper storage of the marquee is just as important as giving it a thorough cleaning.
- The frame of the marquee should be cleaned properly as well. You can make use of a silicone spray and use a cloth to wipe the frame. This will make the frame look clean and would also ensure that it works properly. However all excess remnants of the spray should be removed before putting on the roof.
Maintenance for printed marquees
- The screws used on the marquee should be firm yet not too tight. These should be checked often, particularly before use every time.
- Any missing screws should be replaced on an immediate basis
- Make sure that the inner and the outer leg of the marquee are in working condition. These should be free of debris or it may cause the legs to become jammed over a period of time
- All broken or damaged truss bars should be replaced immediately
- The roof of the marquee shouldn’t be ton. If it is it should be sent for repair or it might cause further damage.
Keeping the above mentioned things in mind would help you care properly for printed marquees for your business.

